Vivotek FE8180 Bedienungsanleitung PDF herunterladen (Seite 97)

VIVOTEK

User's Manual - 97

■ Event name: Enter a name for the event setting.

■ Enable this event: Select this checkbox to enable the event setting.

■ Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher

priority setting will be executed rst.

■ Detect next motion detection or digital input after

seconds: Enter the duration in seconds to pause

motion detection after a motion is detected. This prevents too many events to be triggered within a

short time.

Follow the steps 1~3 to arrange the three elements -- Schedule, Trigger, and Action to set an event. A

total of 3 event settings can be congured.

1. Schedule

Specify the period of time for the event to take effect. Please select the days of the week and the time in

a day (in 24-hr time format) to specify when will the event-triggering conditions take effect.

2. Trigger

This is the cause or stimulus which denes what will trigger the event. The trigger source can be cong-

ured to use the Network Camera’s built-in motion detection mechanism or external digital inputs.

There are several choices of trigger sources as shown below.

Select each item to display its related

options.

■ Video motion detection

This option makes use of the built-in motion detection mechanism as a trigger source. To enable this

function, you need to congure a Motion Detection Window rst. For more information, please refer to

Motion Detection on page 111 for details.

■ Periodically

This option allows the Network Camera to trigger periodically for every other dened minute. Up to 999

minutes are allowed.

■ System boot

This option triggers the Network Camera when the power to the Network Camera is disconnected.

■ Recording notify

This option allows the Network Camera to trigger when the recording disk is full or when recording

starts to overwrite older data.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 218 219

Keine Kommentare

Vivotek FE8180 Bedienungsanleitung Seite 97