Vivotek FE8180 Bedienungsanleitung PDF herunterladen (Seite 60)

VIVOTEK

60 - User's Manual

■ H.264

This Network Camera offers real-time H.264 and MJPEG compression standards (Dual Codec) for real-

time viewing.

If the H.264 mode is selected, the video is streamed via RTSP protocol. There are several parameters

for you to adjust the video performance:

■ Frame size

You can set up different video resolutions for different viewing devices. For example, set a smaller

frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher

bit rate for live viewing on web browsers. Note that a larger frame size takes up more bandwidth.

■ Maximum frame rate

This limits the maximum refresh frame rate per second. Set the frame rate higher for smoothlier video

quality.

Regardless of the power line frequency setting (60Hz or 50Hz), the frame rates are selectable at 1fps,

2fps, 3fps, 5fps, 8fps, 10fps, 12fps, and 15fps. You can also select Customize and manually enter a

value.

Also note the following when using the Local dewarp:

• To disable the Local dewarp function, select the 1O mode from its pull-down menu.

• Local dewarp is congurable on stream #1 and stream #2.

• The PTZ control panel on the main page is not available with the video stream on which the Local

dewarp is applied.

• Each video stream can be congured with an individual local dewarp mode.

• If you change the mount type settings, the Local dewarp conguration will be erased. The camera

then resumes the original 1O display mode.

• The PTZ preset positions have been cancelled in this revision of rmware.

• Note that some software vendors, such as Milestone

, has already implemented the support

for VIVOTEK's plug-ins. You only need to download and install plug-ins for use with Milestone's

software. Please visit VIVOTEK's download site at: http://www.vivotek.com/download/.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 218 219

Keine Kommentare

Vivotek FE8180 Bedienungsanleitung Seite 60