Vivotek PT8133W Installationsanleitung PDF herunterladen (Seite 12)

EN - 11

English

Congure the Wireless Connection

(PT8133W)

1. Make sure your AP (Access Point) and Operating System support the WPS (Wi-Fi

Protected Setup) functions. WPS enables easy setup with compatible APs.

4. Wait for 2 minutes with the onscreen progress bar. The camera should then reboot.

When the progress bar disappears, disconnect your LAN cable. You can refresh or

re-start your web console to see live video.

When WPS conguration is done, wireless connectivity will be established and the

security encryption, such as WEP or WPA-PSK, will be synchronized with the AP.

Use the IW2 utility to nd the camera. As for IP setting, the camera's use of DHCP

or static IP is determined by your conguration on the network camera via the web

console. The camera's default is DHCP.

ADSL/Cable/Hub

12V

1.5A

ETHERNET

WPS

PT8133W

Wireless AP

WPS buttons

2. Connect your camera using a LAN cable, open a web console, and enter the

Conguration -> Wireless page. Select the WPS checkbox, and click the Save

button.

3. The camera's blue LED should start ashing. Press and hold down both of the

WPS buttons on your AP and your camera for at least 1 second. (Some router/

AP will have a virtual button on their management software instead.) Refer to your

AP's documentation for details using its WPS function.

1 2 ... 7 8 9 10 11 12 13 14

Keine Kommentare

Vivotek PT8133W Installationsanleitung Seite 12