Vivotek IP7133/IP7134 Bedienungsanleitung PDF herunterladen (Seite 23)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 23

Network

This section explains how to conﬁgure wired network connection for the Network Camera. It is

composed of the following ﬁve columns: Network Type, HTTP, Two way audio, FTP and RTSP

Streaming. When completed with the settings on this page, click Save to take effect.

Network Type

LAN

Select this option when the Network Camera is deployed in a local area network (LAN) and is

intended to be accessed by local computers.

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a

DHCP server each time the camera is connected to the LAN.

Use ﬁxed IP address: Select this option to manually assign a static IP address to the Network Camera.

Please refer to Internet connection with static IP on page 8 for details.

Enable UPnP presentation: Select this option to enable UPnP

presentation for your Network Camera

so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras

will be listed in My Network Places. Currently, UPnP

is supported by Windows XP or later. Note that to

utilize this feature, please make sure the UPnP

component is installed on your computer.

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to

allow the Network Camera to open ports on the router automatically so that video streams can be sent

out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.

Network Camera (192.168.5.132)

http://192.168.5.129/index.html

Network Camera

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 86 87

Keine Kommentare

Vivotek IP7133/IP7134 Bedienungsanleitung Seite 23