Vivotek ND8301 Installationsanleitung PDF herunterladen (Seite 8)

EN - 7

English



1. Once your NVR is started, you will be prompted by the Setup Wizard. You should then



installation is required.

2. Enter the default User name and Password as admin & admin. It is recommended you



3. Click Next



4. Note the following when you move to the Network page:

4-1. If your local network has a DHCP server, you can select the "Get IP address

automatically (DHCP)."

4-2. If your LAN port connects to an isolated switch with cameras attached to it, you can

manually assign IP addresses to cameras, and the address for the LAN port itself.

The default static IP for the LAN port is

192.168.1.10.

4-3. Connect your WAN port to a router or

AP with the routing capability and then

to a DSL or Cable modem.

5. On the Disk page, Select disk drives by

clicking the checkboxes in front of disk

drives.Select Build single disk, Build

RAID0, RAID1, or other option from the

 pull-down menu. Click

Apply and wait for a few minutes for the



Refer to the description available with

every disk volume type on the screen, such

as those for RAID0 and RAID1.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Vivotek ND8301 Installationsanleitung Seite 8